RK3588 Custom SATA Interface Board, WF-C3588-M2, AndroidSBC, Newcastle

TL;DR: RK3588 Custom SATA Interface Board

SHENZHEN, China, September 12, 2026 - Wanlin Manufacturing Group pushed lot 280 of the WF-C3588-M2 board out of the Longgang plant this week, 26,315 units for Newcastle, United Kingdom, with the export declaration naming Longgang as the place of origin.

AndroidSBC regulatory bulletin on CE, FCC, UKCA, RoHS and IEC 62368-1 coverage for the WF-C3588 serving Newcastle, United Kingdom. AndroidSBC is opening the full WF-C3588 custom motherboard programme to United Kingdom: nine variants on the Rockchip RK3588 platform with 6 TOPS NPU, 8K H.265 decode, dual Gigabit Ethernet and up to 32GB of LPDDR5. Every variant ships from the Wanlin Longgang facility with OEM branding available, ODM carrier design handled in-house, and per-lot CE, FCC, UKCA, RoHS and IEC 62368-1 documentation.

About AndroidSBC and the Rockchip RK3588 Board Family

Wanlin Manufacturing Group has been building custom Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-C3588 is the current custom motherboard programme: nine variants on the same Rockchip RK3588 octa-core 8nm silicon with 6 TOPS NPU, 8K H.265 decode, dual Gigabit Ethernet and up to 32GB of LPDDR5. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks and EMC pre-compliance bench. Newcastle and United Kingdom buyers typically come to the WF-C3588 for one of three reasons: nine custom categories on one silicon, a source factory that takes OEM and ODM work seriously, or a supplier that carries the certification paperwork instead of leaving it to the importer.

WF-C3588-M2 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-M2 (Custom Core Board SOM with Carrier Board Design Service) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United Kingdom importers sourcing the WF-Series, the 16GB + 64GB (WF-C3588-M2-C) variant is the typical configuration for the custom core board and SOM plus carrier programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Custom Core Board SOM with Carrier Board Design Service for United Kingdom Buyers

The first thing United Kingdom procurement teams learn about the custom core board som with carrier board design service category is that quotation speed and delivery reliability are inversely related. The Rockchip RK3588 needs a wafer slot that a broker cannot create, so the fastest quotes are often the ones attached to the least secure allocation. Then there is the software build. A board that boots is not the same as a board that carries the certified stack a United Kingdom retailer will accept, and the gap is normally found during inbound QC rather than at the factory gate.

Then there is the certification file. A stamp is cheap; a Technical File with notified-body reports dated inside twelve months is not, and the difference only matters when a United Kingdom customs officer asks for it. AndroidSBC answers this by doing the customization, the software burn and the documentation at the Longgang plant on every lot, with a per-unit QR that traces back to the burn-in record. For Newcastle importers serving custom Android, industrial, signage, kiosk, robotics, NVR, edge AI and desktop verticals, the nine WF-C3588 custom variants cover the SMARC 2.2 modules, stamp-hole core boards, LGA core boards, COM Express carriers, medical imaging terminals, robotics compute modules, custom carrier designs, and OEM development kits deployment lanes directly, with three memory configurations per variant.

For United Kingdom specifically, the file travels with the goods. In the United Kingdom UKCA marking now sits alongside CE, and Ofcom registration applies to radio equipment. AndroidSBC prepares the UKCA marking with Ofcom radio interface registration documentation for Ofcom, attaches the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), and consigns the lot to Port of Felixstowe on the Felixstowe to Yantian lane.

Competitive Comparison: WF-C3588-M2 vs Competing RK3588 Boards

Three families of board chase the same custom core board som with carrier board design service socket. The first is catalogue hardware with fixed memory and fixed I/O, the second is re-badged stock where nobody owns the schematic, and the third is a real custom platform built by the factory that runs the SMT line. The WF-C3588-M2 belongs to the third family and separates itself on Rockchip RK3588, on customization depth from schematic to firmware, and on a certified image burned per lot.

• vs standard SOM catalogues: the WF-C3588-M2 either matches SMARC 2.2 exactly or the carrier is redesigned around the project, so the module never forces the product.
• vs two-vendor module plus carrier splits: core board and carrier come from one desk, one schematic review and one test plan, which removes the finger-pointing stage entirely.
• vs closed-module vendors: BSP source, SDK and documentation ship with the project, so a customer engineering team can maintain the carrier after delivery.
• vs re-branded modules: the SI report and the thermal map are Longgang documents, not forwarded PDFs from a third party.

Global Custom SOM and Core Board Market Trends

Buyers in Newcastle are reading the Custom SOM and Core Board curve before they commit to a custom core board som with carrier board design service programme. MarketsandMarkets reports the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, 2025-2030), used here as the RK3588-class silicon baseline rather than as a number for this category. That baseline breaks into three practical demand patterns for the WF-C3588 in United Kingdom:

• Medical imaging terminal: a device maker keeps its regulatory file intact by swapping the core board and reusing the validated carrier.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-M2 board carries that headroom without a board change.
• Custom SMARC migration: a legacy SMARC installation moves to RK3588 with a pin-compatible carrier revision and keeps the enclosure.

The Custom SOM and Core Board commentary has shifted from unit growth to supply reliability, and that shift favours suppliers who control their own SMT and burn-in lines.

The common thread in United Kingdom is that single orders are being replaced by blanket agreements with a monthly release, because a custom board programme that has to survive a twelve-month window cannot absorb an allocation gap in the middle of it.

Partner Success Story: Iris Building Systems in Newcastle, United Kingdom

Iris Building Systems, a smart building integrator serving the United Kingdom market, deployed 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme. The rollout covered the medical imaging terminal, custom smarc migration, and machine vision carrier workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 3,200 custom WF-C3588-I1 DIN-rail controller boards for a commercial tower programme
• Region: Newcastle, United Kingdom
• Models used: WF-C3588-M2 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
• Logistics: FOB Yantian with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Felixstowe via the Felixstowe to Yantian lane

"We specified the I/O count, they routed the board. The DIN-rail clip, the conformal coating and the dual GbE uplinks were all line items on one quote from one factory, which is the entire reason we stopped shopping integrator bundles."

- Liang Chen, Systems Director

Field Report: a retail chain signage refresh across Newcastle, where 26,315 units of the WF-C3588-M2 board replaced legacy players in store windows

Reporter Lu Kang, on the ground in Newcastle, United Kingdom. Crews worked store by store overnight so trading hours were never interrupted. The WF-C3588-M2 boards took the estate content package on first boot and reported back to the CMS within the hour. The chain's marketing team re-cut the window loop at 4K once the fleet was live, because the old players had capped it at 1080p.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-C3588-M2 units hold the burn-in with a yield above 99.27 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering UKCA marking with Ofcom radio interface registration administered by Ofcom, cleared for entry at Port of Felixstowe on the Felixstowe to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that United Kingdom importers can hand straight to their customs broker.

Filed by Lu Kang, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-C3588-M2 Application Scenarios

The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-M2 (Custom Core Board SOM with Carrier Board Design Service) as the lead SKU for Newcastle and United Kingdom programmes:

• Medical imaging terminal: a device maker keeps its regulatory file intact by swapping the core board and reusing the validated carrier.
• Robotics compute module: an AMR maker takes the stamp-hole core board and designs a slim carrier for a new chassis generation.
• Custom SMARC migration: a legacy SMARC installation moves to RK3588 with a pin-compatible carrier revision and keeps the enclosure.
• OEM development kit: a product team gets the reference carrier, the SDK and the BSP source and prototypes before committing to tooling.
• LGA core board programme: a display brand solders the core board directly onto its own mainboard for a locked BOM.
• Machine vision carrier: a vision integrator routes MIPI CSI-2 lanes to four cameras and lets the NPU carry the inspection model.
• Fleet compute module: a telematics supplier builds one carrier for three vehicle programmes and swaps memory options per contract.
• Lab instrumentation: an instrument maker keeps a decade-old enclosure alive by replacing only the core board and the BSP.

Partnership Models for Newcastle Buyers

The WF-C3588 custom line is available to United Kingdom partners through three routes, and they can be mixed inside one agreement:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a United Kingdom partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-C3588-M2 is the 16GB + 64GB (WF-C3588-M2-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample and 15-30 days to mass production.

Frequently Asked Questions

What exactly can be customised on an RK3588 motherboard from AndroidSBC?

Answer: Everything from the copper up. Custom PCB and PCBA, custom I/O routing, custom memory and storage configuration, custom display and camera interfaces, custom thermal profile from commercial to -40C to 85C industrial, and custom branding including silk-printed logo, packaging, SKU label and boot animation. The firmware side covers custom Android (GMS or AOSP), Ubuntu, Debian, Yocto and OpenHarmony builds with BSP ports handled by the Longgang engineering desk rather than handed to the buyer as an unmodified vendor drop.

Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?

Answer: Yes, and that work stays in-house. The ODM tier covers custom Android ROM builds with proprietary services and launchers, AOSP builds without Google services, and Linux images on Ubuntu, Debian, Yocto or Buildroot. BSP ports for custom carrier boards are executed by the Longgang engineering desk, with SDK and BSP source released to the partner under NDA. The same desk handles driver development for the I/O you added, which is the part that usually stalls when a factory forwards a vendor drop and walks away.

Can the 6 TOPS NPU on a custom board run our own AI models?

Answer: Yes. The RK3588 NPU runs INT4, INT8, INT16, FP16, BF16 and TF32, and AndroidSBC supports model deployment through the Rockchip RKNN-Toolkit2, with quantization from PyTorch, ONNX, TensorFlow, Caffe and MXNet. As part of the ODM tier, the engineering desk walks your model from framework to RKNN format and validates it on the actual board configuration you are shipping, not a reference unit. Model files are versioned so a retrained model can be pushed to field units through OTA without a board swap.

What are the MOQ and lead times for a custom RK3588 motherboard?

Answer: The structure is deliberately two-speed: 1-3 days for a standard-variant sample so a United Kingdom project team can start immediately, and 15-30 days to mass production on a custom run once the design freezes. MOQ is 5,000 units per shipment on standard variants, with custom and pilot quantities negotiated against the annual volume commitment.

What certifications does a custom board need for United Kingdom, and who handles them?

Answer: Certification is part of the customization scope, not an afterthought. The in-house file covers CE, FCC Part 15, UKCA, RoHS 2.0, REACH and IEC 62368-1 with test reports dated inside twelve months, plus GMS and EDLA tracks for custom Android and display products. The file is built for the exact configuration you ship, which matters for a custom board because a test report on a different memory fit is not a valid report at all.

How long will AndroidSBC keep supplying a custom board?

Answer: Seven years minimum, written into the framework agreement. The RK3588 platform carries a long industrial lifecycle, and Wanlin commits to the supply window, to security patches across the Android, Ubuntu LTS, Debian LTS and Yocto tracks, and to OTA update infrastructure for field-deployed units. For a custom board that is the whole point of going to a source factory: the product lifecycle is a contract term, not a hope.

Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?

Answer: That is routine. AndroidSBC delivers DDP into Amazon FBA in the US, EU and Japan and into 3PL consolidation points at Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton and pallet configuration follows FBA inbound rules, and the place of origin on the declaration is the Wanlin Longgang source factory.

How does AndroidSBC handle RMA or DOA replacements on custom boards?

Answer: The DOA target is 0.3 percent over twelve months. For RMA, partners send the WF-C3588-M2 unit back to Longgang with the burn-in barcode attached, and replacements go out within ten business days. The per-unit record means the failure report usually carries a root cause alongside the replacement, which is what a United Kingdom integrator running a custom configuration actually needs.

Contact AndroidSBC: Start Your WF-C3588-M2 Sourcing Conversation

Wanlin Manufacturing Group sells the WF-C3588 custom motherboard line overseas through AndroidSBC. Newcastle and United Kingdom importers, brand owners and channel distributors who want to source the custom core board som with carrier board design service direct from the Longgang plant can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: UKCA marking with Ofcom radio interface registration for United Kingdom, administered by Ofcom, entering at Port of Felixstowe on the Felixstowe to Yantian lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, customization scope and Incoterm. Provide those and a per-lot quote plus the WF-C3588 MOQ matrix comes back within two business days.